In May 2003, an attempt was made to steal a digital light projector (LCD /DLP) mounted to the ceiling of a major university project room. Cables had been unhooked and a chair was left under the projector, but thieves left empty-handed because KEYED-LOK® tamper-proof screws were used to secure the mount.

Previously the university's LCD/DLP mounts were secured by the hex-pin security screws which came with the mount. After a number of LCD/DLPs were stolen, the hex-pin screws were changed to Bryce Fastener's tamper-proof KEYED-LOK® screws. The very next theft attempt was foiled. Security reported that the mount had been "worked over", but the LCD/DLP remained intact.

Due to the unique socket/key configuration developed specifically for the university, thieves were prevented from unscrewing the projector from the mount with bits available to the general public.

Digital light projectors are being targeted by thieves in universities around the nation. Though most LCD/DLPs are hung from ceiling mounts with tamper-resistant security screws, thieves are able to obtain the security bit tips causing an increasing number of thefts. Some universities have experienced as many as 10 LCD/DLP projectors stolen in one weekend - at monetary loss of up to $50,000.00.

Universities are scrambling to secure their LCD/DLPs. Many are turning to KEYED-LOK®. KEYED-LOK® is a low-cost, tamper-proof solution that works with standard LCD/DLP mounts. Because the socket/key configuration is individualized for each customer, the access to the bits are controlled - preventing theft and protecting property.

For a cost of about $1,000.00, universities can secure their LCD/DLP mounts as well as their other equipment. For more information on how KEYED-LOK® can protect your application, call 1-800-558-1082.

More Applications